VDO SENSORS - FOR ENGINE MANAGEMENT V3.0 Manuel d'utilisateur télécharger pdf (Page 34)

34 Part No. 057-009 5110 Operating Manual Issue 3.3 3/1/2006

11.1.4 PLUG “G” 5 WAY

PIN No DESCRIPTION CABLE SIZE NOTES

39 CT Secondary for L1 2.5mm² (13 AWG) Connect to secondary of L1 monitoring

40 CT Secondary for L2 2.5mm² (13 AWG) Connect to secondary of L2 monitoring

41 CT Secondary for L3 2.5mm² (13 AWG) Connect to secondary of L3 monitoring

42 CT secondary common 2.5mm² (13 AWG) Connect to secondary of all monitoring

CT’s

43 Not connected -

11.1.5 PLUG “H” 4 WAY

PIN No DESCRIPTION CABLE SIZE NOTES

44 Oil Pressure Input 0.5mm² (20 AWG) Connect to Oil pressure sender

45 Coolant Temperature

Input

0.5mm² (20 AWG) Connect to Coolant Temperature sender

46 Not connected -

47 Sender Common Return 0.5mm² (20 AWG) Return feed for senders*.

NOTE*:- If using single terminal senders refer to connection diagram. If using earth return

type senders connect return terminals to pin 47 and also connect pin 47 to earth. This is detailed

in the Appendix section entitled “Sender wiring recommendations” elsewhere in this manual.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Pas de commentaire

VDO SENSORS - FOR ENGINE MANAGEMENT V3.0 Manuel d'utilisateur Page 34